Tyre Safe
When it comes to your car tyre. It can be easy to assume that they’re in good condition. However, you might not necessarily be aware of a problem unless you go out of your way to look for it. In this article, we talk about a few ways to check if your car tires are safe and what to do if something doesn’t seem quite right.
To get the most out of your car & bike tyre- maximum mileage, safety and wear, you’ll ought to properly maintain them. (With the help of your Tyre Dealer), but don’t worry. Ashok Motors here to help you.
Why is Tyres safety so important?
Your safety, besides the protection of your passengers and other roads users, might depend directly on the condition of your vehicle’s Tyres.
Try these items to safe your Tyres-
- Be the correct and size for your vehicle
- Be free from defects and
- Have a tread depth of at least 1.6mm
- Be properly inflated
1. Check your Tyre tread depth
Make sure each your car & bike Tyre has enough tread depth is essential for your road safety. There are lots of reason Car Tyres Dealer in Delhi. For example, a sufficient amount of tread depth is vital so that your car can grip the road properly. This is especially important in wet condition and is one of the most vital checks you can carry out. If you don’t have enough tread depth. You could significantly increase your chances of having an accident while you’re out.
2. Law for Tyre
In India, the law states that each tyre on a car must have a minimum tread depth of 1.6mm if you’re stopped by the police and it’s found that one or more of your tyres has a tread depth below. You could expect to be pay fine Rs.20k and receive three penalty points per tyre. So aside from being crucial for your safety when you’re behind the wheel. Make sure each car tyre has sufficient tread depth could save you a lot of hassle with the law.
3. Check your Tyre tread depth
To check your tyre tread depth. You can use a tool known as tread depth gauge. This device is designed to give you a quick accurate measurement of an individual tyre and will help you determine if your tyre is above the the legal minimum or not.
How can we Check Tyre pressure
The first thing you need to find out the correct pressure for your tyres. This should be stated in your car’s manual and will be referred to as pounds per inch (PSI).
Once you know the PSI for your vehicle. You’ll be able to measure each tyre. You can do this with a digital pressure gauge. Using this device is quick and easy, and it will enable you to work out. If you need to inflate or deflate your tyres. For an accurate reading, make sure you perform this check when your tyre are cold.
Tyres have been known to lose up to 1 PSI (Pounds Per Inch) every month. So check all tyres, including your spare, once a month (Before along trip). It’s easy to check tyre pressure-
- Buy a trusted tyre pressure gauge.
- Check your tyres “Cold”- before you’ve driven or at least three hours after you’ve driven.
- Insert the pressure gauge into the valve stem on your tyre.
Note – If you are using a digital Tyre gauge like the one pictured, the gauge should begin reading the air pressure immediately. Refer to your air pressure gauge owner’s manual for correct usage guides. If you’re using a “Pencil” style Tyre gauge, the gauge will “pop” out and show a measured number. When you hear a “pssst” sound, that’s air escaping the Tyre. The escaping air shouldn’t have an effect on pressure well unless you hold down the air pressure gauge too long.
- Compare the measured PSI to the PSI found on the sticker within the driver’s door of your vehicle or in owner’s manual don’t compare to the PSI on your tyre sidewall.
- Your PSI is above the number, let air out until it matches. If below, add air (or have an Ashok Motors Help You) until it reaches the proper number.
Low Tyres pressures can lead to Tyre damage. See the inflation difference-
Nitrogen Air v/s Compressed Air-
Most Tyres are filled with compressed air. But some Tyre retailers have started to put nitrogen into their client Tyres.(Nitrogen is just dry air with the oxygen removed. Air contains nearly seventy-nine nitrogen already.) as a result of nitrogen replaces oxygen, less air will escape your Tyres and your inflation pressure stays higher longer. Tyres manufactured by Michelin, Ceat Tyre are designed to deliver their expected performance once inflated with air or nitrogen, as long as the user respect the pressures suggested by the vehicle manufacturer on the vehicle’s placard or by the tyre manufacturer.
You need to understand wheel alignment and balancing
You may have heard of wheel alignment and wheel balancing before but not needed to give them much thought. However, it pays to have some understanding of them to keep your tyres in good condition.
1. Wheel alignment
Wheel alignment knows to adjust the position of the wheels to ensure that they are at a 90° angle to the road surface and parallel with each other. Make sure your wheels are correctly aligned will maximize the life of your tyres as well as help your vehicle to keep a straight line on the roads.
I want to tell you there are few tale signs that can help you to detect if your tyres aren’t properly aligned. For example, if they have worm quickly or If your steering wheel pulls to one side when you’re driving, this could indicate that your wheel alignment is out.
2. Wheel Balancing
Wheel balancing enables your car tyres to rotate without vibrating. The balance of your car wheel is determined by inspecting for any heavy spots on both the wheel and tyres. These flaws are counteracted by installing a balancing weight on the opposite side of the wheel from where the heavy spot. If your wheel is out of balance, you may notice a cupped shapewear pattern on the tyre. You may also get a vibration in your steering wheel.
Tread Pattern Wear
Wear on your car’s & Bike tyre tread pattern can tell you a lot about the health of your car’s suspension component and the alignment of your car wheel, but excessive wear at any points on a tyre is the reason to have a tyre replaced immediately.
Tyre are designed to wear excessive on a specific area of the tyre can be indicative of an issue with a car alignment or core component that same for a replacement tyre if fitted too, so it is advisable to carry out any necessary work when replacing the affected tyre to prevent the issues from happening again.
Under the Indian law, the legal minimum tread depth for a road vehicle is 1.6 mm across the central 3/4 of a tyre. As this is a legal requirement, failure to meet this requirement constitutes an MOT failure.
Ceat Car Tyre
For consumer want to save money part worn tyres may seem like an attractive offer- you can get the right set of tyres for your car at a discounted price and these days the tyres even need to pass a series of regulation before they can be legally sold.
However, part worn tyres still have a number of potential issues, and Ashok Motors estimates that 34% of the worn tyres still do not meet the safety necessary for every road user. Additionally, when you buy a part worn tyres you get no indication of what kind of use the tyres have previously and no real guarantee that the tyres will last.
Talk to Ashok Motors for Tyre safety advice
If you want to find out more about which tyre you should fit to your car. Come to your local Ashok Motors Shop for advice on the best tyres for your vehicle.
